30oz Tumbler Heat Press Attachment for Machine Transfer Sublimation

This tumbler press attachment allows customized transferring of images, pictures, and patterns to the surface of mugs via sublimation. The outer of the item is constructed with stainless steel, making it more durable, and the inner is made of silicon, ensuring stable thermal stability. The voltage of the 30 oz heating transfer pad is 110V, and the hole spacing is 2.65 inches. The machine specifications of each manufacturer are different, and the holes can be drilled using a screwdriver, depending on the machine's hole spacing.

The operation is easy: 1) Select or design the image and clean the surface of the cup. 2) Wrap the cup with the image so that it is centered and symmetrical on both sides, and stick it to the paper with thermal tape. 3) Place the cup in the center of the heating pad, adjust the pressure ball of the print cup (not too tight or too loose), and then close the handle. 4) Turn on the power, adjust the instrument time to about 200-300 seconds, and the temperature to about 180-200 degrees Celsius. 5) Full printing requires turning the cup half a circle and printing again. Press the timing button to stop when the countdown ends. 6) Remove the cup and peel off the paper, and the beautiful cup you made is finished.

The material of the heat press attachment is iron sheet and silica gel, with a diameter of 3.35" and a height of 10.6". The plug can be either male or female, and the capacity is 30 oz. The voltage is 110V. The package includes 1 heat press attachment.

Please note that this heat press transfer machine is not suitable for minors to use or for food processing. Ensure that there will be a mug in the heating element when you turn on the power. There may be slight errors in the manual measurement, and the color may differ slightly due to different screen displays.

The voltage of this 30oz sublimation cup heat press attachment is 110V, and it uses a K-type thermocouple temperature sensing wire. The screw hole spacing is 2.65 inches/6.73 cm.

The exterior of the heat press attachment is fully covered by high hardness steel, and the interior is made of silicone, which has stable heat transfer performance. The smooth and insulated surface of the electric heating film can effectively protect the surface of the cup from cracking and enhance the hardness.

This heat press attachment is suitable for tumblers and mugs with a height of less than 9.8" and a diameter of 2.67-3.35 inches. It is universal for 30oz, 20oz, 16oz, 15oz, 11oz, 8oz, and 7oz tumblers and mugs. It allows customized transferring of images, pictures, and patterns to the surface of mugs via sublimation, making it a great gift for your friends and family.

product information: