Sublimation Tumbler Heat Press Attachment for DIY Mug Printing (Female Plug)

The tumbler press attachment allows for customized transfer of images, pictures, and patterns onto the surface of mugs through the process of sublimation. The exterior of the item is constructed with durable stainless steel, while the interior is made of silicone, ensuring stable thermal stability.

The heating transfer pad operates at 110V, with a hole spacing of 2.65 inches. However, it's important to note that the machine specifications may vary among different manufacturers. Depending on the machine's hole spacing, the holes can be easily drilled using a screwdriver.

Using this attachment is a straightforward process: 1. Select or design the desired image and clean the surface of the cup. 2. Wrap the cup with the image, ensuring it is centered and symmetrical on both sides. Secure the image with thermal tape. 3. Place the cup in the center of the heating pad. Adjust the pressure ball of the print cup, not too tight or too loose, and then close the handle. 4. Turn on the power, set the instrument time to approximately 200-300 seconds, and adjust the temperature to 180-200 degrees Celsius. 5. For full printing, rotate the cup halfway and print again. Press the timing button to stop when the countdown ends. 6. Remove the cup and peel off the paper to reveal the beautifully customized cup.

The heat press attachment is made of iron sheet and silica gel, with a diameter of 3.35 inches and a height of 10.6 inches. It is available with either a male or female plug, depending on the compatibility with your machine. The attachment has a capacity of 30 ounces.

Please note that this heat press transfer machine is not suitable for use by minors or for food processing. Ensure that a mug is in the heating element when the power is turned on. Due to manual measurement, there may be slight size variations, and the color may differ slightly due to different screen displays.

The voltage of this 30-ounce sublimation cup heat press attachment is 110V, and it features a K-type thermocouple temperature sensing wire. The screw hole spacing is 2.65 inches/6.73 cm.

The exterior of the heat press attachment is fully covered in high-hardness steel, while the interior is made of silicone, providing stable heat transfer performance. The smooth and insulated surface of the electric heating film can effectively protect the surface of the cup from cracking and enhance its hardness.

This versatile attachment is suitable for tumblers and mugs with a height of less than 9.8 inches and a diameter of 2.67-3.35 inches, accommodating a range of sizes from 30 ounces down to 7 ounces. It allows for the customization of mugs with different patterns, making them an excellent holiday gift for friends and family.

product information: